Diffusion Model of a Non-Integer Order PIγ Controller with TCP/UDP Streams

In this article, a way to employ the diffusion approximation to model interplay between TCP and UDP flows is presented. In order to control traffic congestion, an environment of IP routers applying AQM (Active Queue Management) algorithms has been introduced. Furthermore, the impact of the fractional controller PIγ and its parameters on the transport protocols is investigated. The controller has been elaborated in accordance with the control theory. The TCP and UDP flows are transmitted simultaneously and are mutually independent. Only the TCP is controlled by the AQM algorithm. Our diffusion model allows a single TCP or UDP flow to start or end at any time, which distinguishes it from those previously described in the literature.     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

A new generation of visible-light-active photocatalysts—The alkaline earth metal bismuthates: Syntheses,compositions, structures,and properties

Semiconductor materials containing bismuth have attracted the attention of researchers over the past several decades, as a result of their high photocatalytic activity in various reactions and/or high efficiency in their photoelectric conversion of solar energy. This interest originated from the observations that bismuth-containing semiconductors have a sufficiently small bandgap, which makes them sensitive to radiation in the visible spectral range; thus, visible-light-active materials. Among the various bismuth-containing semiconductor materials, the bismuthates of alkaline earth metals are distinguished and describe into separate groups. This article reviews research on the known methods of obtaining bismuthates of various alkaline earth metals (magnesium, calcium, strontium, and barium), and further analyzes their composition, structure, and visible-light-active photocatalytic activity.     

Electrochemical detection of nitrate,nitrite and ammonium for on-site water quality monitoring

This review examines the most recent electrochemical developments for nitrate, nitrite and ammonium detection for on-site water monitoring. There remains a high demand for effective field-based detection of the dissolved inorganic nitrogen (DIN) analytes to aid in mitigating nitrogen loading. Electrochemical approaches show increasing potential to fill this role as advancements in nanotechnology continually improve analytical performance and on-site applicability. However, translating these improvements into the field still faces the resonating challenges of reaching analytical proficiency (selectivity, sensitivity, robustness, stability), practical end-user functionality, minimal matrix interferences and cost effectiveness. Herein, we elaborate on these challenges via a critical evaluation of current studies and examine how realistic the prospects of on-site nitrate, nitrite and ammonium are. We also present recommendations in addressing these gaps to conclude the review.     

Analysis of thyreostats in bovine feces using ultra high performance liquid chromatography with tandem mass spectrometry

A method based on ultra‐high performance liquid chromatography was developed and validated to detect six thyreostatic compounds: tapazole, thiouracil, methylthiouracil, dimethylthiouracil, propylthiouracil, and phenylthiouracil in faeces of bovine. Thyreostats were extracted from the matrix with a mixture of methanol and buffer (pH = 8). Next step was derivatization of analytes with 3‐iodobenzylbromide. The liquid chromatographic separation of derivatives was obtained on a SB‐C18 column (50 × 2.1 mm; 1.8 μm, Agilent) with gradient elution using a mobile phase consisting of acetonitrile/0.1% acetic acid within 7.5 min. The analysis was performed on a Shimadzu NEXERA X2 ultra‐high performance liquid chromatograph with triple quadrupole MS 8050 instrument operating in positive electrospray ionization mode. Depending on the target compound, two or three diagnostic signals (selected reaction monitoring transitions) were monitored. The procedure was validated according to the Commission Decision 2002/657/EC. Recovery and repeatability met the performance criteria specified by this document for banned compounds. The recovery ranged from 97.5 to 110.5%, and repeatability did not exceed 14.1%. Decision limits and detection capabilities were below 10 μg/kg. The highest decision limits and detection capabilities concentrations were observed for phenylthiouracil of 3.48 and 6.96 μg/kg, respectively.     

The Active Sites of a Rod‐Shaped Hollandite DeNOx Catalyst

The identification of catalytically active sites (CASs) in heterogeneous catalysis is of vital importance to design and develop improved catalysts, but remains a great challenge. The CASs have been identified in the low‐temperature selective catalytic reduction of nitrogen oxides by ammonia (SCR) over a hollandite manganese oxide (HMO) catalyst with a rod‐shaped morphology and one‐dimensional tunnels. Electron microscopy and synchrotron X‐ray diffraction determine the surface and crystal structures of the one‐dimensional HMO rods closed by {100} side facets and {001} top facets. A combination of X‐ray absorption spectra, molecular probes with potassium and nitric oxide, and catalytic tests reveals that the CASs are located on the {100} side facets of the HMO rods rather than on the top facets or in the tunnels, and hence semi‐tunnel structural motifs on the {100} facets are evidenced to be the CASs of the SCR reaction. This work paves the way to further investigate the intrinsic mechanisms of SCR reactions.     

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

载机平台光电转塔目标定位的仿真算法

目标定位是光电转塔典型功能和任务之一，对其定位精度的考量也是转塔作战技术指标之一，针对该问题，从理论和仿真角度进行了分析。分析目标定位中用到的坐标系及其相互转换关系，给出光电转塔视轴反演、有源目标定位、无源目标定位的算法流程，通过仿真实验加以验证，考虑了定位过程中可能的随机误差来源，并分析是否采用均值滤波及其对定位结果的影响，最后通过Monte-Carlo分析计算了定位精度。分析结果表明:1）有源定位比无源定位的精度高，在仿真假设条件下，精度约提高1倍；2）均值滤波后，定位精度有较大提升（约提高15倍）；3）18 km距离时典型无源定位精度在80%置信度条件下约为39.4 m；4）统计直方图反映出80%置信度CEP半径及最大误差距离随载机位置、姿态、转塔视轴等（体现在目标载机距离上）不同参数的变化结果。